Sea-Bird Electronics SBE 38 Uživatelský manuál stáhnout pdf (Strana 41)

Section 4: Setting Up MicroTSG SBE 45

Setting Up Configuration (.xmlcon or .con) File

Seasave and SBE Data Processing, our real-time data acquisition and data

processing software (respectively), require a configuration file. The

configuration file defines the MicroTSG – which parameters are output by the

MicroTSG, and the data output rate - and indicates whether NMEA and

SBE 38 data is to be appended to the data stream. The software uses the

configuration file to interpret and process the data. If the configuration file

does not match the actual instrument configuration, the software will not

be able to interpret and process the data correctly.

To verify the contents of the .xmlcon or .con file:

1. Double click on Seasave.exe.

2. Click Configure Inputs. On the Instrument Configuration tab, click Open. In

the dialog box, select the .xmlcon or .con file and click Open.

3. The configuration information appears on the Instrument Configuration

tab. Verify the output matches the output programmed into the SBE 45,

and the use of the optional Interface Box, SBE 38, and NMEA matches

your system. Click Modify to bring up a dialog box (shown below) to

change the configuration.

4. Click Save or Save As to save any changes to the .xmlcon or .con file.

Click Exit when done reviewing /modifying the configuration.

Notes:

• Seasave and SBE Data Processing

versions 7.20a introduced .xmlcon

files (in XML format). Versions 7.20a

and later allow you to open a .con or

.xmlcon file, and to save t to a .con

or .xmlcon file. Seasave and SBE

Data Processing use the same file.

• A new or recalibrated instrument

ships with a configuration file that

reflects the current configuration as

we know it. The file is named with

the instrument serial number,

followed by a .con extension. For

example, for an instrument with

serial number 2375, Sea-Bird names

the file 2375.con. You may rename

the file (but not the extension) if

desired; this will not affect the

results.

Define data in MicroTSG data

stream:

• Output conductivity with each

scan - Must agree with MicroTSG

setup (OutputCond=).

• Output salinity with each scan –

Must agree with MicroTSG setup

(OutputSal=).

• Output sound velocity with each

scan – Must agree with MicroTSG

setup (OutputSV=).

See reply from DS for setup

programmed into MicroTSG.

• Use junction box – Select if MicroTSG data transmitted to computer through Interface Box.

• SBE 38 temperature added – only applicable if Use junction box is selected. Select if

Interface Box connected to SBE 38 remote temperature sensor. If selected, Seasave and

SBE Data Processing (Data Conversion and Derive modules) use remote temperature data

when calculating density and sound velocity.

• NMEA data added – only applicable if Use junction box is selected. Select if Interface Box

connected to a NMEA navigation device. Seasave automatically adds current latitude,

longitude, and universal time code to data header. Select NMEA (Lat/Lon) Interface in

Seasave’s Configure menu to control how Lat/Lon data is incorporated.

See PN 90402 – SBE 45 Power, Navigation, and Remote Temperatue Interface Box manual.

New to create

new .xmlcon or

.con file for this

CTD.

Open to select

different .xmlcon

or .con file.

Save or Save

As to save

current .xmlcon

or .con file

settings.

Time between scans. Must agree with MicroTSG setup (Interval=); see reply

from DS.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 103 104

Komentáře k této Příručce

Žádné komentáře

Sea-Bird Electronics SBE 38 Uživatelský manuál Strana 41

Komentáře k této Příručce

Související produkty a manuály pro Měření, testování a kontrola Sea-Bird Electronics SBE 38